I am running a PN S01 motor with a GPM v2 turbo and the turbo does not get hot. The motor does get pretty warm when running a 9T pinion but not enough to cause any damage.
It seems to be a good combination.
I did see another post by someone using the same combination and their turbo was getting hot. Could be a bad connection or short somewhere.
GPM v2 sure can handle a standard S01, even a modified S01.
But beware the capacitor may get screwed up after serveral run as it a bit too small.
Change into a 680uF, 10V rating will ba a lot better.
I am running a PN S01 motor with a GPM v2 turbo and the turbo does not get hot. The motor does get pretty warm when running a 9T pinion but not enough to cause any damage.
It seems to be a good combination.
I did see another post by someone using the same combination and their turbo was getting hot. Could be a bad connection or short somewhere.
-kai
Thanks for the info ;)