Buy a set of stock overland rims or use your existing ones.Buy a lego set Lego Racers #8384 Jungle crasher or any of these kits #8383 Nitro Terminator #8385 not sure the name of this one.The part # on the tire is lego group 43.2 x 28 s and its the same on all of these kits.Down to business take the lego rims and set them aside.Take the tires off you overland rims so they are bare and set them aside.Now take the lego tires and set them aside.Take the lego rim and use your dremel to grind the inside center piece down flush or close to flush with the rim.I am talking about the piece that the axle bolts to.Then take your dremel and gently open up the diameter of the rim.Do not go over board a little at a time.Continue to do this untill the lego rim snaps snuggly over the bare stock overland rim.Once you have done this drill out the center of the lego rim where the axle bolts to.Then mount your lego tires on the lego rims.Then bolt your bare overland rims on your overland.When that is done snap the mounted lego rims +tires over the stock overland rim.That should do it.If little clearance use washers to space it out.You will have to grind the body or body lift to get full turning radias.Any questions please email me.Im still struggling with the body lift so be patient i will post the best way when i figure it out.I will also post pics soon.
Good luck
Rcrawler :wink: